Pages

▼

Tuesday, May 7, 2013

STUDENT PROJECT: HOW TO MAKE AN INSTRUMENT PERIOD 3 SPRING 2013

==========================
HOW TO MAKE AN INSTRUMENT: 
DRUM and SHAKERS

Emily's & Spencer's Page 
Period 3

For our instrument you will need:
1) get a tube
2) a cloth
3) a big balloon
4) (if you want)paint
5) (if you want) markers
6) glue
How to get started:
First get the tube and around the edge put glue. After, get the cloth and balloon around the tube and let it dry.
That's how you make our project!!!!!!!

---------------------------------------------
LINKS!!!!


                                          
How to make the 2nd part of our  project

1) small water bottles
2) toilet paper rolls
3) beads
4) colorful tape
Ok, first you would need to get a small water
bottle then you get the roll.
------------------------------------------------
How to put it all together:
------------------------------------------------
Ok, so first you get the water bottle then you
put on the glitter and beads. Get the roll from
the toilet paper and cut the roll. Put it around
the top of the water bottle where the lid is.
Tape it with any color tape you chose then
wrap it around the roll.
That's how you do the second part 
of our project!






------------------------------------------------
LINKS

And that's our project!!

==========================

Alexis and Breana Period 3
How to make a percussion instrument!

MARACAS

Materials needed:
-Water bottles: two of them

                 

-Rocks
-Tape
-Pipe Cleaners
What kinds of sounds does it make?
-It is like a maraca but a empty water bottle with rocks/pebbles/marbles inside


10 links
1) http://www.youtube.com/watch?feature=player_detailpage&v=RY6W5imTyAw
2) http://www.youtube.com/watch?feature=player_detailpage&v=NALaHRKJmSE
3) http://www.youtube.com/watch?feature=player_detailpage&v=qf9WRGD8E-k
4) http://www.youtube.com/watch?feature=player_detailpage&v=YHFqi5tXYLI
5) http://www.youtube.com/watch?feature=player_detailpage&v=MWXrN3nIZyI
6) http://www.youtube.com/watch?feature=player_detailpage&v=XCd-7qYEA1c
7) http://www.youtube.com/watch?feature=player_detailpage&v=hInZ_Y4vfnQ
8) http://www.youtube.com/watch?feature=player_detailpage&v=qrORONaIKzE
9) http://www.youtube.com/watch?feature=player_detailpage&v=lnadB2AuDvE
10) http://www.youtube.com/watch?feature=player_detailpage&v=LhW31GjoQ2k
==========================

HOW  TO MAKE MARACAS   


BY: PAOLA AND SAMANTHA PERIOD 3
MATERIALS YOU NEED:
-2 plastic cups
-markers or paint
-masking tape
-noise makers (beans, beads, rice, etc.)
10 LINKS
http://www.youtube.com/watch?feature=player_detailpage&v=LML6kZrGPJM
http://www.youtube.com/watch?feature=player_detailpage&v=ECnYUtKaTvo
http://www.youtube.com/watch?feature=player_detailpage&v=N6fO3ok3nTk
http://www.youtube.com/watch?feature=player_detailpage&v=FOvNxtMooiU
http://www.youtube.com/watch?feature=player_detailpage&v=P0xLx4MuyM8
http://www.youtube.com/watch?feature=player_detailpage&v=eK54m1Bvprg
http://www.youtube.com/watch?feature=player_detailpage&v=APUDprnfOIs
http://www.youtube.com/watch?feature=player_detailpage&v=zaVJ78R_67g
http://www.youtube.com/watch?feature=player_detailpage&v=rGauQcphkMc
http://www.youtube.com/watch?feature=player_detailpage&v=42GU3HE3vtc
            

 EXAMPLES:






STEPS:


1) GET 2 CUPS
2)PUT THE NOISE MAKERS IN ONE OF THE CUPS

3)TAKE THE OTHER CUP AND TAPE IT AROUND BOTH CUPS TO PUT IT TOGETHER
4)DECORATE/DESIGN THE MARACA
5)SHAKE SHAKE, SHAKE SHAKE SHAKE ,SHAKE YOUR CUPS

 ==========================

HOME MADE INSTRUMENTS 
BY ERNIE AND DAVID PERIOD 3
A WIND INSTRUMENT

INGREDIENTS: 
Glass Bottles 

First you have to have an empty glass bottle and then blow over it.
This is a blowing instrument that makes a whistle.

     
 
==========================
How To Make A Percussion Instrument

BY: BRYSEIDA, NIKKI, CESAR PERIOD 3


For this project we are going to make maracas


Things you will need for this project :

Mini water bottle 
Toilet paper stick 
Duct tape 
Beans


It should look like this:



1. Put beans in the mini water bottle

2. Open the toilet paper stick and put it around the water bottle

3. Secure the stick with duct tape and put duct tape on the bottom
4. Then decorate it any way you like or just leave it... its your choice 

Examples of how you can
decorate:



==========================



==========================
Sam and Melissa Period 3
BIEBER SHAKE ~

Ingredients
glue
dried beans or uncooked rice.
cardboard tube (toilet paper roll is what we used)
stickers, paint, markers, construction paper, etc to decorate
tape
==========================
Nicholas Period 3

 HOW TO MAKE MARACAS



STEP 1: Find an empty plastic water bottle


STEP 2: Find some beans


STEP 3: Open the empty water bottle by unscrewing the lid


STEP 4: Insert beans into the open water bottle


STEP 5: Close water bottle by screwing the lid

STEP 6: ENJOY  YOUR MARACAS =D

==========================



KEVIN PERIOD 3

Cardboard Guitar


Supplies:


colored file folder 
rubber bands
utility knife
pencil (or wooden dowel)
hot glue gun
cardboard
drill


Steps


Trace 3 of the full size guitar shape right onto the cardboard.

Then cut off the top part of the guitar and trace 2 of the shortened guitar piece onto 
the cardboard as well.

Then use a utility (or exacto) knife to cut out the 5 guitar shapes.

Then, use a hot glue gun to attach two of the bigger guitar pieces together.

Next, cut up a pencil (or wooden dowel) to create a bridge at each end of the guitar 
strings. Cut a piece that is 1 1/2 inches and the other one 2 3/4 inches.

Then, draw a 2 3/4 inch line that is 1 inch below the circle opening on the front side of 
the 2 guitar pieces that you just glued together. Then draw 4 dots below the line that are about a 1/2 inch apart and about a 1/3 inch below the line.

Then use a utility knife to make a shallow cut into the cardboard, right along that line.

Then use your finger to push a dent down along that line, to create a little divot for 
the pencil bridge to lay.

Then hot glue the bigger pencil piece right down into the dented crease, securing the bottom bridge in place.

Next, drill some holes through the 2 layers of cardboard, right where your 4 marks are.

For the bridge at the top of the guitar neck, make a 1 1/2 inch long line right below where the neck curves out at the top. Then make 4 dots about a 1/2 inch above the line, about 
a 1/3 inch apart. Make a shallow cut along the line, dent it in with your finger, and then 
hot glue the smaller pencil piece right into the crease……..just like you did above.

Now, use your utility knife to cut out little dents in the pencil, to help keep each of the guitar strings in place.

For the guitar strings, I found some colored file folder rubber bands at Staples. They 
are jumbo size (7 inch rubber bands) and are the perfect size to use for this project. 
I cut 4 rubber bands open for the guitar.

Then, tie one end of each of the rubber bands along the long edge of a sturdy 1 inch (or similar) paper clip

From the back side of the guitar, thread each of the other ends of the rubber bands 
through the 4 holes at the top of the guitar neck……..and pull them all the way through until the paper clip is flush with the backside of the guitar.

Then, one rubber band at a time, pull them along the front of the guitar and through 
the drilled holes towards the bottom of the guitar. Tie the other end of each rubber 
band to a 1 1/2 inch (or similar) paper clip that is on the back side of the guitar.

Thread each rubber band through each hole and tie into a knot along the long end of 
the paper clip.

Then trim off each rubber band but don’t cut it too close to the paper clip. Then place 
a bit of glue on the other long edge of the paper clip, just to secure it down. But don’t 
let the hot glue touch the rubber band or it will melt it and break it.

Then, place a good amount of glue along the backside of the guitar with the strings (but don’t get any glue on the rubber bands) and then place the 3rd full size guitar piece onto 
the back……covering everything up.

Then glue the 2 smaller guitar pieces to the very back of the guitar……giving the guitar more thickness and durability……plus it gives the body of the guitar that fullness like 
a real one has.

Press the layers together firmly.

Trim off any uneven edges with your utility knife if needed.

at